Bobrick B-43944 Combination Commercial Paper Towel Dispenser/Waste Receptacle, Recessed-Mounted, Stainless Steel

The Bobrick ConturaSeries unit comes with TowelMate and LinerMate. It features a satin - finish stainless - steel construction, adding a touch of elegance. The flush tumbler lock provides security. The dispenser can hold 600 C - fold or 800 multi - fold towels, ensuring an ample supply. The waste receptacle has a 15 - gal (56.8 - L) capacity and extends 5 1/8' (130mm) from the wall. The radius on the corners and edges of the flange, door, and waste receptacle matches other Bobrick ConturaSeries washroom accessories. It has a removable front panel for easy cleaning. The rough wall opening is 16' W, 54 3/4' H, and 4' min depth (405 x 1390mm x 100mm). For retrofitting TowelMate before April 2010 or LinerMate before December 2009 into existing units, refer to the accessories section below.

Using this Bobrick combination unit is easy. First, install it following the rough wall opening dimensions provided. Load the dispenser with either 600 C - fold or 800 multi - fold towels. When someone needs a towel, they can simply pull one out. The waste receptacle is there to collect trash. Empty it regularly when it gets full, as it has a 15 - gal capacity. For cleaning, just remove the front panel. Keep the unit looking good by wiping it down with a mild cleaner from time to time. If you want to retrofit TowelMate or LinerMate, make sure to check the accessories section for the units installed before the specified dates.