Product Detail
The ASI 046921A-6 Paper Towel Dispenser and Waste Receptacle is a great choice for commercial restrooms. It combines a paper towel dispenser and a waste receptacle in one unit, making it convenient and helping to keep the area clean. It's designed for semi-recessed mounting and needs a rough opening that's 15-3/4 inches long, 54-1/2 inches high, and 4 inches deep. The dispenser can hold paper towel rolls that are 8 inches in diameter, 8 or 9 inches long, and 800 feet in length, along with a 4-inch diameter stub roll. Instead of a mechanical lever, it uses a touch-free proximity sensor powered by four D-size batteries. The lower waste container has a 13.3-gallon capacity. Made of 18-gauge and 22-gauge stainless steel, it has an appealing No. 4 satin finish. A multi-staked, full-length piano hinge attaches the door to the cabinet. Both the towel dispenser and waste receptacle are secured with a keyed tumbler lock to prevent theft and vandalism.
Using this product is easy. First, make sure you have installed it properly according to the required rough opening size. Load the paper towel rolls into the dispenser. The touch-free proximity sensor will dispense a towel when you place your hand near it. When the waste container gets full, use the key to unlock the unit and empty it. Keep in mind that the sensor runs on four D-size batteries, so check the battery level regularly and replace them when needed. To maintain the product, wipe it with a soft cloth regularly to keep the stainless - steel finish looking good. Avoid using abrasive cleaners as they may damage the satin finish. Also, always keep the key in a safe place to prevent unauthorized access.
