Product Detail
The ASI 046921-9 is a great solution for commercial restrooms. It combines a paper towel dispenser and a waste receptacle in one convenient unit, reducing messes. Surface-mounted, it measures 17-3/4 inches long, 56 inches high, and extends 10 inches from the wall when installed. The dispenser holds paper towel rolls 8 inches in diameter, 8 or 9 inches long, and 800 feet in length, with a 4-inch diameter stub roll included. It has three pre-set dispensing lengths. The lower waste container has a 13.3-gallon capacity. Made of 18-gauge and 22-gauge stainless steel with an attractive No. 4 satin finish. A multi-staked, full-length piano hinge attaches the door to the cabinet. Both the towel dispenser and waste receptacle are secured with a keyed tumbler lock to prevent theft and vandalism.
Using this product is easy. First, install it on a surface as described in the installation guide. When it comes to filling the paper towel dispenser, open the door using the key, place the paper towel rolls inside, and set the desired dispensing length. After use, simply throw the used paper towels into the waste container below. As for maintenance, regularly clean the stainless - steel surface with a mild cleaner to keep its satin finish looking good. Check the keyed tumbler locks periodically to make sure they are working properly. Also, empty the waste container when it gets close to full to avoid overflow. If there are any issues with the pre - set dispensing lengths, refer to the troubleshooting section of the manual.
