This sanitizing station is crafted from 5/8″ plastic laminate with antimicrobial properties, featuring a Cosmic Strandz finish. It's freestanding, allowing for easy placement wherever needed and offers convenient mobility. All edges and corners are rounded for safety, and the bottom has rubber feet to prevent sliding. The back door, secured with a keyed lock, gives access to dispenser components. The station comes fully assembled, and the included 0390 - HSD hand sanitizer dispenser is mounted on - site. The 0390 - HSD gel hand sanitizer dispenser offers touchless operation. When the sensor under the dispenser is activated, a single shot of gel hand sanitizer is automatically dispensed by a battery or AC - powered mechanism. It has a polished chrome finish on all exposed surfaces and a 1.6 Gal (6L) capacity. Only gel hand sanitizer within the viscosity range of 3.5k – 6.5k mPa·s or cP and pH range of 5.5 ~ 8.5 can be used. A complete dispensing chart and other relevant technical documents are available for all dispensers. The FS - 0700A is battery - powered, while the FS - 0700AC is AC - powered.
Using your sanitizing station is easy. First, make sure you've mounted the 0390 - HSD hand sanitizer dispenser on the podium as it comes assembled and the dispenser is installed on - site. When you need hand sanitizer, simply place your hand under the dispenser. The sensor will detect it, and a single shot of gel hand sanitizer will be automatically dispensed. Remember, only use gel hand sanitizer with a viscosity between 3.5k and 6.5k mPa·s or cP and a pH between 5.5 and 8.5. For safety, be careful around the station as it's freestanding. The rubber feet on the bottom prevent it from sliding, but still place it on a stable surface. When accessing the dispenser components, use the key to open the back door. To maintain your station, keep it clean. Wipe the polished chrome surfaces regularly with a soft cloth. If you have the FS - 0700A battery - powered unit, replace the batteries when they run out. For the FS - 0700AC AC - powered unit, ensure the power supply is stable. Refer to the complete dispensing chart and other technical documents for more detailed information.
