The Bobrick ConturaSeries toilet paper dispenser is a top - notch choice for commercial restrooms. It features a satin - finish stainless steel unit paired with a stainless steel dispensing mechanism. The flush tumbler lock provides security and easy access. This dispenser can hold two rolls of toilet paper with a diameter of up to 5 1/4' (135mm), each roll having 1800 sheets. When the bottom roll is used up, the extra roll automatically drops into place. Its theft - resistant, heavy - duty spindles are made of one - piece, molded ABS, ensuring durability. The unit measures 6 1/16' W, 11' H, 5 15/16' D (155 x 280 x 150mm). The cabinet and door are made of 18 - 8, type - 304, 22 - gauge (0.8mm) stainless steel, with the door having an 18 - gauge (1.2mm) stainless steel frame. All exposed surfaces have a beautiful satin finish. The dispensing mechanism, inner housing, and cam are also crafted from 18 - 8, type - 304, 18 - gauge (1.2mm) stainless steel. It's easy to operate, load the tissue rolls into the dispensing mechanism and lock them. The depleted rolls can only be removed after unlocking the door. Installation is flexible, suitable for different types of partitions and wall surfaces.
Using your Bobrick B - 4288 toilet paper dispenser is easy. First, unlock the flush tumbler lock and open the door. Then, load two standard - core toilet tissue rolls with a diameter of up to 5 1/4' (135mm) into the dispensing mechanism and lock them in place. When the bottom roll runs out, the extra roll will drop down automatically. To remove a depleted roll, you need to unlock the door. For installation, if you have particleboard or solid - core partitions, use four #10 x 5/8' (4.8 x 16mm) sheet - metal screws (not included) at the marked points. For hollow - core metal partitions, add a solid backing. For plaster or dry wall, use concealed backing as per local codes. Other wall surfaces may need fiber plugs, expansion shields, toggle bolts, or expansion bolts. When it comes to maintenance, simply wipe the satin - finish stainless steel surfaces with a soft, damp cloth regularly to keep it looking clean. Avoid using abrasive cleaners as they can scratch the surface. Also, check the spindles and dispensing mechanism from time to time to make sure they are working properly.
