The Bobrick TrimLine Series presents a remarkable surface - mounted single roll toilet tissue dispenser. Its threaded escutcheon is a great feature as it hides the mounting plate and fits snugly against the wall. The hood is firmly attached to the bar with a set screw. This dispenser can take standard - core sizes from 3/4″ (20mm) up to 1 - 1/2″ (40mm) and is 4″ (100mm) wide. A set screw in the post acts as a vandal - deterrent. With an escutcheon diameter of 2″ (50mm), an overall width of 5 - 1/2″ (140mm), a height of 4 - 1/2″ (115mm), and it projects 1 - 5/8″ (35mm) from the wall without the tissue roll, it's a practical and space - efficient choice for any restroom.
Using this Bobrick toilet tissue dispenser is easy. First, open the hood by loosening the set screw. Then, place a standard - core toilet tissue roll with a size from 3/4″ (20mm) up to 1 - 1/2″ (40mm) and 4″ (100mm) wide inside the dispenser. Close the hood and tighten the set screw. When you need to replace the roll, just repeat the process. As for maintenance, regularly check the set screw to make sure it's tight and the dispenser is secure. Wipe it down with a mild cleaner every few weeks to keep it looking clean. Be careful not to use abrasive materials as they might scratch the dispenser. Also, avoid over - tightening the set screw as it could damage the parts.
