Bobrick B-518 Left Hand Folding Commercial Shower Seat, 360 lb Load Capacity, Stainless Steel

This left - hand commercial shower seat from Bobrick complies with the Planning Guide for Accessible Restrooms. It features a 1 1/2' (38mm) thick, foam - padded, white, water - resistant Naugahyde seat with an enclosed 1/2' (13mm) plywood base. The frame and mounting brackets are made of type 304 stainless steel and have a self - locking mechanism. When properly installed, it can support up to 360 lbs (163 kg). The seat is 32 7/8' (835mm) wide and projects 22 11/16' (575mm) from the wall. Safety warning: The strength of the shower seat depends on the anchors and walls it's attached to. It must be firmly secured. Consult local building codes. Don't use if not properly secured or if the weight exceeds 360 lbs (163 kg) to avoid malfunction and potential injury.

Using this shower seat is easy. Just make sure it's properly installed on a suitable wall following local building codes. When you sit on it, keep in mind that it can support up to 360 lbs (163 kg), so don't exceed this weight. If you notice that the seat isn't firmly attached to the wall, the building owner or maintenance staff should take it out of service right away to avoid any risk of injury. For maintenance, since it has a water - resistant seat, you can clean it with a mild soap and water solution. Regularly check the self - locking mechanism and the brackets to ensure they're in good condition.