Bobrick B-5221 Commercial Toilet Seat Cover Dispenser, Surface-Mounted

This commercial toilet seat cover dispenser from Bobrick is a great addition to any restroom. It's made of durable grey ABS plastic with a high - gloss finish. It's surface - mounted and is ADA compliant. The dispenser can hold up to 250 single - or half - fold toilet seat covers or one box. It has a capacity of 500 covers and fills from the bottom. Measuring 16 1/8' W, 11 1/2' H, 2 1/2' D (410 x 290 x 65mm), it requires a 5' (125mm) minimum clearance from the bottom to any horizontal projection for filling. The front has the same arc as other Bobrick MatrixSeries washroom accessories, and the corners, edges, and top are designed to complement them. Mount it on the wall or partition of the toilet compartment using two #8 x 1½'' (4.2 x 38mm) flat - head sheet - metal screws (not included).

Using this toilet seat cover dispenser is easy. First, make sure there's at least 5 inches of clearance from the bottom of the dispenser to the top of any horizontal projection. Then, you can fill it from the bottom through the concealed opening with single - or half - fold paper toilet seat covers. When installing, you'll need to mount it on the wall or partition of the toilet compartment using two #8 x 1½'' flat - head sheet - metal screws. For plaster or dry wall, add a concealed backing. For other wall surfaces, use fiber plugs, expansion shields, toggle bolts, or expansion bolts. To maintain it, just wipe the dispenser with a damp cloth regularly to keep the high - gloss finish looking good. And when the seat covers run out, simply refill it from the bottom.