ASI 0620-1836 (18 x 36) Stainless Steel Channel Frame Mirror, 18 Wide X 36 High

This 18'W x 36'H mirror features a 1/2' X 1/2' (13 x 13 mm) 20 gauge type 304 satin finish stainless steel channel. It's a one-piece roll - formed member that encases the mirror and backing, showing a tight mitered corner. The mirror is installed on two wall brackets and secured by theft - resistant screws. All edges are protected by friction and chafe - absorbing fillers. The back is shielded by a full - size shock - absorbing water - resistant filler and a full - size one - piece 20 gauge corrosion - protected steel. The top and bottom wall mounting brackets are made of 20 gauge corrosion - protected steel and spot - welded into an 'H' hanger. A Phillips Pan Head locking screw secures the mirror to the lower bracket.

Using this mirror is easy. First, find a suitable wall location and install the top and bottom wall mounting brackets. Then, carefully place the mirror on the brackets and use the theft - resistant screws to secure it. Make sure the mirror is level. When cleaning, use a soft, damp cloth to wipe the mirror surface. Avoid using abrasive cleaners as they may scratch the mirror or damage the stainless - steel frame. Check the screws regularly to ensure they are tight. If the mirror gets wet, dry it promptly to prevent water damage. Also, keep the mirror away from sharp objects to avoid chipping or cracking.