The ASI 0751 - A Heavy Duty Robe Hook is crafted from satin chrome - plated brass. It features a heavy - duty chrome - finished brass design and is surface - mounted. This hook is an excellent choice for facilities that need to meet ADA and other barrier - free accessibility guidelines. When properly installed, it can handle up to 300 pounds of direct downward force. For side reach access, install it 54 inches from the floor, and for forward reach access, 48 inches from the floor. It projects 3 - 1/4 inches from the mounting surface, and the hook end is 1 - 1/2 inches high, perfect for holding robes, coats, handbags, etc. Mount it with three No. 10 self - tapping screws (not included). After installation, the three 7/32' diameter countersunk holes in the flange and mounting hardware are exposed for easy access when needed.
Using your ASI 0751 - A Heavy Duty Robe Hook is simple. First, decide where you want to install it, making sure to follow the height requirements (54 inches from the floor for side reach and 48 inches for forward reach). Then, use three No. 10 self - tapping screws (you'll need to get these on your own) to mount the hook on the surface. Once it's up, you can hang robes, coats, handbags, and other items on it. Just be careful not to overload it, as it's designed to hold up to 300 pounds of direct downward force. To keep it looking good, clean it with a soft, dry cloth regularly. If it gets dirty, you can use a mild soap and water solution, but dry it thoroughly afterward to prevent any damage to the chrome finish.
