Bradley 2902-2873 Automatic High Efficiency Hand Dryer, 110-120/208/220-240 Volt, Surface-Mounted, Steel

This Bradley Aerix hand dryer is a top - notch choice. It has a 1/16 - inch thick one - piece steel cover with a white epoxy finish. The cover is attached to the base plate using two vandal - proof lock screws and can be locked with a special key wrench. It features a high - speed, universal brush motor with a fully adjustable potentiometer. The Class A, aluminum centrifugal double asymmetrical inlet fan wheel and aluminum scroll fan ensure efficient operation. There's a safety thermal cut - off for added protection. The waved wire NiCr heating element on a mica frame has a self - resetting thermal cut - off at 302°F. An electronic infrared detection sensor with a fully adjustable potentiometer provides easy activation. It comes with polycarbonate viewing windows and automatically shuts off after 60 seconds. The 1/8 - inch thick aluminum base plate has four 5/16 - inch holes for wall mounting and includes silent blocking to reduce mechanical vibrations. It supports 100 - 120V, 208V, and 220 - 240V, and can dry hands in 12 - 15 seconds. It's surface - mounted and ADA compliant.

Using this hand dryer is super easy. Just place your hands under the dryer, and the infrared sensor will detect them and start the drying process. The dryer will automatically shut off after 60 seconds, so you don't have to worry about leaving it on. When mounting, use the four 5/16 - inch holes on the 1/8 - inch thick aluminum base plate to attach it to the wall. Make sure to use the special key wrench to lock the cover properly with the vandal - proof lock screws. For maintenance, keep the polycarbonate viewing windows clean. Check the safety thermal cut - off regularly to ensure it's working. And if you notice any mechanical vibrations, the silent blocking should help, but if it persists, it might need further inspection. Always use the appropriate voltage (100 - 120V, 208V, or 220 - 240V) for safe operation.