Bobrick B-6897 (48 x 1.5) Commercial Grab Bar, 1-1/2 Diameter x 54 Length, Concealed-Mounted, Stainless Steel (Peened)

This commercial grab bar is crafted from 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing with a 42-inch width and 1-1/2-inch (38mm) diameter. The concealed mounting flange is a 1/8-inch (3mm) thick, type 304 stainless steel plate, 2 inches wide and 3-1/8 inches high (50 x 80mm), featuring screw holes for concealed anchors. The 22-gauge (0.8mm), type 304 stainless steel cover with a satin finish has a 3-1/4-inch (85mm) diameter and snaps over the mounting flange to hide the screws. It measures 42 inches wide by 54 inches deep (107 x 137cm).

Using this grab bar is easy. Just find a suitable location on the wall and use the concealed anchors through the screw holes in the mounting flange to secure it. Make sure the wall is strong enough to support the weight. When using the grab bar, hold it firmly to avoid any slips. For maintenance, simply wipe it with a soft, damp cloth regularly to keep the satin finish looking good. Avoid using abrasive cleaners as they might scratch the stainless steel surface.