The Bobrick Matte Black Collection, part of the Designer Series, presents this automatic 'top fill' and 'touch - free' soap dispenser. Its die - cast zinc body construction ensures durability. It uses universal bulk foam soaps, which can significantly cut down on usage costs. This dispenser has a unique portion control feature that helps balance patron satisfaction and the operating budget. It comes in five stylish finishes including Polished Chrome, Polished Nickel, Brushed Nickel, Polished Brass, and Matte Black. A 6V AC Adapter with a U.S. Plug is standard. There's also an automatic faucet available in a matching finish, with adjustable time - out durations, line purging, adaptable sensor range, and LEED flow - rate options. For new installations, make sure the mounting hole is 1 - 3/8” (35mm) in diameter. For existing/retrofit, check the hole size and enlarge it if needed using an appropriate hole saw. Refer to the installation instruction with the mounting template link below.
Using the Bobrick B - 842 foam soap dispenser is easy. Just place it on your countertop and ensure it's properly connected to the 6V AC Adapter. When a hand is detected by the sensor, it'll dispense a controlled amount of foam soap. For installation, whether it's a new setup or a retrofit, always check the mounting hole diameter. It should be 1 - 3/8” (35mm). If you're retrofitting and the hole is smaller, use a proper hole saw to enlarge it. Keep the dispenser clean by wiping it with a soft cloth regularly. If you notice any issues with the sensor range or soap dispensing, you can adjust the settings as described in the user manual. Also, make sure to use universal bulk foam soaps for the best cost - saving results and proper functioning of the dispenser.
