Easy Comply Vertical Extension - AED Lettering - 12 Length, ECVE-12-AED

The Easy - to - Comply Vertical Extension is a great solution designed in line with the 2010 ADA Standards for Accessible Design Section 307.2 Protrusion Limits and NFPA - 101 4″ Projecting Object Rules. It can be easily mounted on almost any surface like walls and structural columns without the hassle of framing, patching, or painting. This extension allows objects that project more than 4″ from the mounting surface to meet various projecting object limitations. It provides a 4 - inch extension starting 27 inches off the floor up to the bottom of the desired object. The living hinge design is really cool. If the extension gets bumped, it can rotate 90 degrees in either direction and safely return to the center each time. Installation is a breeze. First, mark the spot for mounting. Then, peel the protective covering off the adhesive on the back. Press the adhesive firmly onto the surface to affix it. For a more secure mounting, you can drill 4 holes and use 4 screws.

Using the Easy - to - Comply Vertical Extension is straightforward. First, figure out where you want to mount it and mark the spot. Then, take off the protective covering on the back adhesive and press the extension firmly onto the surface. If you want it to be extra secure, drill 4 holes and use 4 screws. When using it, keep in mind that the living hinge design means it can rotate 90 degrees if bumped. So, don't be alarmed if it moves a bit. As for maintenance, just wipe it clean with a dry cloth regularly. Avoid using harsh chemicals as they might damage the adhesive or the hinge. That's all you need to know to make the most of this useful extension.