Halsey Taylor Platinum Push Button Water Cooler, 3.0 gph -

This Halsey Taylor water cooler is suitable for both indoor and outdoor use. It stands freely and features a push-button operation. With a single-level design, it has a cold water capacity of 3 gallons per hour. The 1/10 HP compressor runs on 115VAC with 2.5A full load amps. It has a platinum color, 37 inches in height, 12 - 1/4 inches in width and depth. The 3/8 - inch tube O.D. inlet and 1 - 1/4 - inch drain connection are standard. The refrigerant is 134A (CFC - free), keeping water at 50°F. The regulator maintains a constant stream height at line pressures from 20 to 105 psi. It meets ANSI/NSF61, Section 9 standards, and comes with a 5 - year warranty on the refrigeration system and 1 - year on electrical components and the water system.

Using this water cooler is easy. First, connect it to a water source using the 3/8 - inch tube O.D. inlet and make sure the drain connection is properly set up. Then, plug it into a 115VAC power outlet. Press the push button when you want cold water. The water will come out at a temperature of about 50°F. When it comes to maintenance, keep the cooler clean by wiping it regularly with a soft cloth. Check the water system occasionally for any leaks. Remember, the refrigeration system has a 5 - year warranty and the electrical components and water system have a 1 - year warranty. If you notice any problems during this time, contact the manufacturer. Also, make sure the line pressure stays between 20 and 105 psi to keep the water stream at a constant height.