Product Detail
This bottle filling station is suitable for both indoor and outdoor use. It has a wall - mounting type and is ADA compliant. Operated by an electronic sensor, it has 1 level. With a cold water capacity of 8 gph, a 1/5 Compressor HP, and 4A full - load amps. It measures 19 - 3/4' in width and 3.5 in depth, with a 3/8' tube O.D. inlet. The color is stainless steel, and it runs on 115 voltage. It uses CFC - free Refrigerant 134A to keep water at 50 Degrees F. The regulator maintains a constant stream height at line pressures from 20 to 105 psi. It has a 1 - 1/4' drain connection. It comes with a WaterSentry(R) Plus 3000 Gal Filter, an 8 GPH chiller, and a mounting frame. It has a 5 - year warranty on the refrigeration system and 1 - year on electrical components and the water system. It meets multiple standards including ADA, ASME A112.19.3/CSA B45.4, CAN/CSA 22.2 120, NSF 372, NSF 61, NSF 42, NSF 53, UL 399, ensuring compliance in accessibility, lead, water quality, electrical, and mechanical aspects.
Using this bottle filling station is easy. Just place your bottle under the electronic sensor, and the water will start flowing automatically. You can use it both indoors and outdoors. When using it, make sure the line pressure is between 20 and 105 psi for a constant stream height. For maintenance, regularly check and replace the WaterSentry(R) Plus 3000 Gal Filter to ensure good water quality. The refrigeration system and electrical components are covered by a warranty, but in case of any issues, contact the manufacturer. Keep the station clean and dry to avoid any mechanical problems. Also, ensure the drain connection is clear to prevent water blockage.
