The Bobrick B-43949 is part of the ConturaSeries. It comes equipped with TowelMate and LinerMate. The dispenser features a satin-finish stainless steel construction, with rounded corners on the flange, door, and waste receptacle that match other ConturaSeries washroom accessories. It has a flush tumbler lock for security. This dispenser can hold 600 C-fold or 800 multi-fold towels. The waste receptacle has a 15-gal (56.8-L) capacity and extends 9 1/8' (230mm) from the wall. The removable front panel makes cleaning a breeze, and the skirt allows for surface-mounting. The cabinet, skirt, flange, door, paper towel dispenser, and waste receptacle are all made of high-quality 18-8, type-304 stainless steel. The TowelMate has a 90° return towel guide angle and a Nylon Rod for single-towel dispensing. The LinerMate trash liner holder makes it easy to install and remove disposable trash liners. The dispenser can dispense C-fold or multi-fold towels without any adjustment. The cable door-swing limiter protects washroom accessories and walls. Installation is straightforward, but make sure to follow local building codes.
Using this paper towel dispenser is easy. Just load the paper towels in the tray, then pull one sheet over the TowelMate towel rod to start dispensing. To insert a disposable trash liner, lift the LinerMate bag holder up and forward, rest it on the edge of the waste receptacle front panel, place the liner inside, fold it over the sleeve, and tie a knot in the corner. When it's time to empty the waste, gather the liner from the holder and lift the bag. For cleaning, simply remove the front panel of the waste receptacle. Remember, when installing, use the appropriate screws and follow local building codes. If the unit projects above the wainscot, fill the gap with an aluminum channel or other filler. Regularly check the TowelMate and LinerMate for any signs of wear and replace parts if needed. Keep the stainless steel surfaces clean with a mild cleaner to maintain the satin finish.
